Installation of top ladder stabiliser microlite
Attachment of microlite
Advance ladder training level 2
Ladder training level two
Ladder training level two and three
Level 3 ladder training
Flat roof access and egress training.
Installation of top ladder stabiliser microliteDemonstration on how to install a microlite standoff which will reduce the risk of ladder sliding left or right at the top.
Attachment of microliteMicrolite-at-the-top-of-ladder-using-a-ratchet-strap-and-the-Y-sling-attached-to-a-rope
Advance ladder training level 2Connecting rope to the ladder. The purpose of this exercise is that the engineer will fasten a rope grab to the rope which is then fastened to the front anchor point of your harness allowing the engineer to maintain a third point of contact when access or egress is required on a leaning ladder.
Rope GrabEngineer attached to rope on ladder using a rope grab. This system allows engineer to maintain a third point of contact.
Ladder training level twoEngineer demonstrating safe access up ladder using fall arrest rope grab.
Ladder training level two and threeEngineer has climbed ladder which is secure top and bottom, engineer is attached to rope with rope grab and a restraint lanyard hooked onto top rung of ladder.
Level 3 ladder trainingEngineer, safe access from leaning ladder onto a roof ladder.
Flat roof access and egress training.Safe access from a flat roof onto a secure ladder.
Tower trainingDemonstration on how to climb a tower safely. Equipment used, twin leg double lanyard with fall arrester.